12 Facts About Replacement Upvc Window Handles To Make You Seek Out Other People
Replacement Upvc Window Handles
Most replacement window handles made of upvc include everything you require to complete the task. However, if the old handle was fitted with screws or pins holding it, these will need to be removed. Remove the’snap-in’ covers at the base of your handle.
The next step is to identify the type of window and lock that your new handle – this is crucial!
Espag
Espag handles are a multipoint lock system that can be fitted to casement windows, such as uPVC and wooden double glazing. They have seven millimetre square spindles that fits into the gearbox on the window made of uPVC. When the handle is turned, it triggers a series of locks around the perimeter of the window. Espag handles are also known as shootbolt handles and provide additional security when compared to the standard single point lock that is found on older window frames.
They are available in a range of different styles, such as inline and cranked handle designs that can be used for either left or right hand operation. You can also find ergonomic handles that improve the appearance and feel of your window, as well as the handle.
You’ll need to measure the size of the spindle from base of your uPVC handle if you wish to order the correct replacement. This measurement is known as step height. It will help you find the perfect uPVC handle for your home.
If you require to remove screws that secure the handle, use a screwdriver or pliers. After taking off the screws or pins that hold the spindle together then you can remove the handle.
After you have removed the handle, you can open the locking mechanism within the frame of the windows and remove the cockspur block located next to the handle. This will allow the window to be opened. The replacement uPVC handles you have ordered should be able to slide onto the cockspur block before sliding into handle spindle to allow the window to open again. If you want to be sure that your uPVC handles are securely secured you should replace the cockspur block with the brand new block.
Cockspur
Cockspur handles can be found on older uPVC or aluminium windows. The handle is closed and then turns into a wedge-shaped plastic catch. (Not to be confused with timber latches which are also covered in this section.) The handles are available in lockable and nonlockable models. They are available in different nose heights that can be adjusted to the existing frame.
The handle locks using an small spur (little triangle bit) pulling up against a wedge made of plastic that is fixed to the frame. They are typically one-way handles, but a deadlock with a locking mechanism can be added to give additional security.
Similar to Espag handles, the replacement handles for cockspur handle are simple to put in place, all you need is a new set of screws (supplied) and the correct backset. The backset is measured from the baseplate to the underside nose of the handle. In general Aluminium window frames usually have a 9mm backset, while UPVC employs 21mm. There are a myriad of variations however it is essential to measure the handle prior to buying the handle (see the video below for more details on how).
This type of window handle can be replaced by simply unscrewing the existing handle and removing the spindle, or in certain cases, the entire handle. The replacement handle is then fixed with a pair of pozidrivs screws. The pozidriv screw is available in a brass or a zinc finish to match the existing hardware. There is also an option of self-locking pozidriv screws.
This cockspur handle is simple to install and is ideal for replacing or repairing old uPVC Windows. They are a universal design that makes them suitable for all profiles and backsets. Each handle is equipped with three packers, each having different thicknesses. They are installed on the underside of handle noses and can be combined to create backsets as small as 9-13mm or as large 21mm. They are available in right and left handed models and are available in either lockable or nonlockable models with a choice of nose heights.
Tilt and Turn
The top European window style with tilt and turn has been in use in Europe for a long time, but it’s just now beginning to gain popularity in the United States. The windows combine the functionality of three window styles – tilt, in-swing, and pivot. They are perfect for older homes as they offer more airflow than standard windows.
When tilt and turn windows are closed, they lock like any other fixed window. But, Replacement Upvc Window Handles by turning the handle 90° or Replacement Upvc Window Handles 180@ (depending on the kind of tilt and turn window) the sash can be opened upwards and the window will be tilted in order to allow air circulation through the space at the top of the frame. This is a great way to ventilate without having to open a large windows that could be dangerous.
If the handle is turned another 90@ or 180@, the sash can be fully opened as the door. This allows full air circulation, which is particularly useful in draughty rooms or houses where smoke and other odors can accumulate. This allows you to easily clean the glass’s outside, as you can do it from inside your home. This is a job which often requires precarious steps.
Tilt-and turn windows are also secure. When locked in the closed position, they are very difficult to open from outside, and they come with double seals to prevent rainwater from entering the home when in the tilted in-swing position. This feature is especially useful for older homes, where burglars tend to target windows that can be opened by the side hinges.
Spade
There are a variety of handles that can be installed on windows with double-glazed upvc. There are two kinds of handles: Cockspur and Espag. Other options include tilt and turn handles as well as spade or blade handles as well as monkey tail handles, and various other types. The type of handle you choose will depend on your preference and the kind of windows you have.
To select the right replacement window glass upvc window handle, it is important to know how your current handle is fixed to the frame. This is known as handing, and it is an important element to be aware of when shopping online. Certain handle styles do not fit all windows. Some handles, for instance, are angled whereas others are straight, and can turn either left or right. It is also important to know what the spindle’s length is, which is the distance from the base of the handle to the head of the handle.
Knowing whether or not your windows require a limiter is also important when choosing the correct handle. These are typically found in high-rise flats or commercial buildings, but they’re not required for homes that are mostly domestic. Additionally, you must take into consideration step height, which is the distance from the bottom of the screw plate to the top of the handle.
Spade comes from Old English spadu, spaedu or spada. It has been translated into numerous languages including German spaten and Low German spathen. In the Harlem Renaissance of the 1920s in New York City the word spade was used to mock black people. Since then spade has been an emblem of African American pride and heritage.
When replacing a Cadenza handle, it’s crucial that you choose the right size. Handles are available in straight and angled versions that differ by a few millimeters. The handle head may change between a D and T shape, or have no handles at all.